Hobby-Lobby
DX3C DSM 3-CHANNEL SURFACE RADIO
DX3C DSM 3-Channel Surface Radio Highlights:, 20 Model Memory,
DX3C DSM 3-Channel Surface Radio DX3C DSM 3-Channel Surface Radio ...Hobby-Lobby
DX3R PRO 3-CHANNEL RACING SYSTEM
| Built-In Telemetry | Check temp, speed and voltage in real time.* |
| Four programmable timers | Up, Down, Integrated and Rolling Lap |
| Modulation | DSM/DSM2/Marine |
| Band | 2.4GHz |
| Receiver | SR3100 |
DX3R PRO 3-Channel Racing System Highlights:, 50-model memory, Technical Specifications:, DX3R PRO 3-Channel Racing System Specs:, Number of Channels, Model Memory:50, Transmitter (Tx) Battery Type:AA,
The DX3R PRO is packed with first-class software High-End Software. ...Hobby-Lobby
DX6I 6-CHANNEL FULL RANGE MICROLITE MD2
The DX6i Microlite takes 6-channel radios to a whole new level The 6-channel DX6i Microlite uses the same full range DSM2 technology found in the Spektrum DX7 and includes an impressive list of programming features for both airplanes and helicopters that are simple to access and use. It comes with the?AR6100e DSM2 Microlite?6-channel receiver,?which weighs only 4.4 grams and?is the ultimate 2.4GHz receiver for foamies and up to 400?class helis.?Also included with the DX6i Microlite are four Spektrum DSP75 servos which offer superior speed, torque and precision for parkflyers and micro helis. DX6i 6-Channel Full Range Microlite MD2 Highlights: Full range 2.4GHz DSM2 6-channel microlite radio 1500mAh NiMH AA battery cells 150mAh wall charger 2 programmable mixes 4-DSP 7.5-gram digital programmable servos 1-AR6100e microlite park flyer 6-channel air receiver Digital trims with dual speed trim scroll 10-model memory DSM2 technology Airplane and Helicopter programming Exponential throw Model copy Programmable dual rates Servo Monitor Servo Reverse Sub Trims Throttle cut Trainer mode Travel adjust 2-position flap Three wing types 5-point graphic throttle curve Contrast adjustment 2 swash types: 1servo/3servo CCPM Differential Graphic pitch curve Integrated timer Gyro adjust, Normal, Stunt & Hold Revolution mixing Roller/Selector user interface DX6i 6-Channel Full Range Microlite MD2 Specs: Channels: 6 Modulation: DSM2 Band: 2.4GHz Servos: 4 7.5-Gram Super Sub-Micro Digital Programmable Model Memory: 10 Modes: Mode 2 Transmitter (Tx) Battery: AA NiMH 1500mAh batteries (included) Charger: 100-240V AC wall charger 150mA output (included) Experience Level: Intermediate, ,
The DX6i Microlite takes 6-channel radios to a whole new ...Hobby-Lobby
OPTIC6 SPORT 2.4GHZ TX / OPTIMA 6 RX
| Standard Programming | 10-Model Memory |
| ACRO Programming | Flaperon Mix |
| Standard Programming | 10-Model Memory |
| ACRO Programming | Flaperon Mix |
HELI Programming:, Swash Select (120 degrees CCPM/90 degrees Mechanical), Technical Specifications:, HELI Programming:, Swash Select (120 degrees CCPM/90 degrees Mechanical),
Optic 6 Sport 2.4GHz Transmitter with Rechargeable Battery, Charger, and ...Hobby-Lobby
OPTIC 6 SPORT 2.4GHZ TX /2 OPTIMA 6
| Standard Programming | 10-Model Memory |
| ACRO Programming | Flaperon Mix |
HELI Programming:, Swash Select (120 degrees CCPM/90 degrees Mechanical),
Optic 6 Sport 2.4GHz Transmitter with Rechargeable Battery, Charger, and ...Hobby-Lobby
PARK 250 BRUSHLESS OUTRUNNER MOTOR
| Type | Brushless outrunner |
| Voltage | 6-8.4V |
| RPM/Volt (Kv) | 2200 |
| Resistance (Ri) | .25 ohms |
| Idle Current (Io) | .45A |
| Maximum Burst Current | 8A (15 sec) |
| Speed Control | 6A-10A brushless |
| Weight | 14 g (0.5 oz) |
| Overall Diameter | 22mm (.85 in) |
| Shaft Diameter | 2mm |
| Overall Length | 23mm (.90 in) |
Park 250 Brushless Outrunner Motor 2200Kv Highlights:, Ideal for 3D models 4-6 oz (115-170 g) and sport and scale models 6-12 oz (170-340 g), Technical Specifications:, Park 250 Brushless Outrunner Motor 2200Kv Specs:, Size:, Upgrade for 180-size, Bearings or Bushings:, Two 2 x 5 x 2.5mm Bearings, Recommended Prop Range:, 5.5 x 4.5-8 x 6 Slow Flyer, Continuous Current:7A, Cells:, 6 Ni-MH/Ni-Cd or 2 Li-Po,
Park 250 Brushless Outrunner motor Ideal for 3D models 4-6 ...Hobby-Lobby
40 WATT BALANCE CHARGER FOR 1-4 LITHIUM CELLS
Simple Inexpensive 1-4 cell Lithium balance charger 4-3/4" x 2-9/16" x 1-3/16". Charges Lithium Polymer, Ion and LiFe (a123) cells up to a maximum of 4S and 3.5A rate when connected to a 12V DC power source. Integrated balance circuit and large LCD display showing voltage, current, capacity and charging time. Includes input lead with alligator clips to attach to a 12V battery and an output lead with 3.5mm banana plugs to connect to the charger. You will need to solder the mating connector for your battery type to the output connector. For use with up to 4S JST-XH balance plug (2.5mm pin spacing). These plugs are on our current RTF, ARF models and our Powerwing Lipos. Balance adapters SRC510, SRC513, SRCH0132, and SRCH0133 will not fit this charger, they are designed for a 6-cell charger. 40 Watt Balance Charger Specs: Input voltage: 11-15 Volt DC No. of cells: 1-4 Battery type: LiPo/LiIon/LiFe (a123) Charge current: 0.1-3.5A (40W) LCD type: Voltage, Current, Capacity, Charging Time and Battery Type Weight: 6.4 oz. (180g), ,
Simple Inexpensive 1-4 cell Lithium balance charger 4-3/4" x 2-9/16" ...Hobby-Lobby
ARMING BASE
| This Package Includes the following | 1 � Base Bracket |
The ArmSafe® System was created to improve the safety of electric RC models by giving the user better control of WHEN they energize and de-energize their models. This control can help reduce the risk of propeller strikes due to inadvertent motor starts. ArmSafe® is an effective solution for reducing, not eliminating, the risk of injury around high powered electric models. When ArmSafe® is CORRECTLY USED, the user has better control of WHEN they energize and de-energize their RC model. Uses Deans® Ultra Plug® Pat# 5,533,915. It was developed to have all the features RC modelers want:, 1. High Current Rating, Instructions for Arming Base:, Arming Base PDF Instruction Manual,
Arming Base The ArmSafe® Arming Base includes the parts for ...Hobby-Lobby
ARMING PLUG
| This Package Includes the following | 1 � Arming Plug |
The ArmSafe® System was created to improve the safety of electric RC models by giving the user better control of WHEN they energize and de-energize their models. This control can help reduce the risk of propeller strikes due to inadvertent motor starts. ArmSafe® is an effective solution for reducing, not eliminating, the risk of injury around high powered electric models. When ArmSafe® is CORRECTLY USED, the user has better control of WHEN they energize and de-energize their RC model. Uses Deans® Ultra Plug® Pat# 5,533,915. It was developed to have all the features RC modelers want:, 1. High Current Rating, Instructions for Arming Plug:, Arming Plug PDF Instruction Manual,
Arming Plug Spare ArmSafe® Arming Plugs. Always make sure that ...Hobby-Lobby
ARMSAFE KIT 10 GUAGE
The ArmSafe® System was created to improve the safety of electric RC models by giving the user better control of WHEN they energize and de-energize their models. This control can help reduce the risk of propeller strikes due to inadvertent motor starts. ArmSafe® is an effective solution for reducing, not eliminating, the risk of injury around high powered electric models. When ArmSafe® is CORRECTLY USED, the user has better control of WHEN they energize and de-energize their RC model. Uses Deans® Ultra Plug® Pat# 5,533,915. It was developed to have all the features RC modelers want:, 1. High Current Rating, This Kit include everything needed for one complete arming system:, 1 - (AS1-B Arming Base), Instructions for ArmSafe Kit 10 guage:, ArmSafe Kit 10 guage PDF Instruction Manual,
ArmSafe Kit 10 guage This is a complete ArmSafe® Kit ...Hobby-Lobby
ARMSAFE KIT 12 GUAGE
The ArmSafe® System was created to improve the safety of electric RC models by giving the user better control of WHEN they energize and de-energize their models. This control can help reduce the risk of propeller strikes due to inadvertent motor starts. ArmSafe® is an effective solution for reducing, not eliminating, the risk of injury around high powered electric models. When ArmSafe® is CORRECTLY USED, the user has better control of WHEN they energize and de-energize their RC model. Uses Deans® Ultra Plug® Pat# 5,533,915. It was developed to have all the features RC modelers want:, 1. High Current Rating, This Kit include everything needed for one complete arming system:, 1 - (AS1-B Arming Base), Instructions for ArmSafe Kit 12 guage:, ArmSafe Kit 12 guage PDF Instruction Manual,
ArmSafe Kit 12 guage This is a complete ArmSafe® Kit ...Hobby-Lobby
ARMSAFE KIT 14 GUAGE
The ArmSafe® System was created to improve the safety of electric RC models by giving the user better control of WHEN they energize and de-energize their models. This control can help reduce the risk of propeller strikes due to inadvertent motor starts. ArmSafe® is an effective solution for reducing, not eliminating, the risk of injury around high powered electric models. When ArmSafe® is CORRECTLY USED, the user has better control of WHEN they energize and de-energize their RC model. Uses Deans® Ultra Plug® Pat# 5,533,915. It was developed to have all the features RC modelers want:, 1. High Current Rating, This Kit include everything needed for one complete arming system:, 1 - (AS1-B Arming Base), Instructions for ArmSafe Kit 14 guage:, ArmSafe Kit 14 guage PDF Instruction Manual,
ArmSafe Kit 14 guage This is a complete ArmSafe® Kit ...Hobby-Lobby
US ARMY PATRIOT M-104 KIT LEVEL 1
| Length | 21.3 in. (54.1 cm) |
| Diameter | 1.64 in. (41 mm) |
| Estimated Weight | 2 oz. (56.7 g) |
| Recommended Engines | B4-4 (First Flight), B6-4, C6-5 |
| Projected Max Altitude | 600 ft. (183 m) |
The Big Bertha gives you a slow, realistic liftoff. What a thrill it is to watch! Propelled by powerful standard Estes engines, thisWhat a classic! That's what you'll get with the Estes U.S. Army Patriot M-104 rocket that dominated the skies in the past. This 1:10 scale model rocket of the desert hero and mother of all air defense missiles is based on the U.S. Army's M-104 surface-air missile. Blast 600 feet high using the standard Estes engines., Technical Specifications:, U.S. Army Patriot Specs,
US Army Patriot M-104 Kit Level 1 The U.S. Army ...Hobby-Lobby
STILETTO 29 BRUSHLESS TUNNEL BND (OVERSIZE)
| Length | 30.125 in (765mm) |
| Beam | 11 in (279mm) |
| Prop Size | 1.6 x 2.5 inch |
| Hull Type | Tunnel |
| Kit/RTR | BND |
| Minimum Age Recommendation | 14 years |
Stiletto 29 Brushless Tunnel BND Highlights:, Bind-N-Drive™ model does not include a transmitter, allowing you the freedom to use the Spektrum™ 2.4GHz DSM® transmitter of your choice, Needed to Complete: Two 7.2V sub-C batteries or Two 7.4V 25C Li-Po batteries, Spektrum DSM2 Marine compatible transmitter, Technical Specifications:, Stiletto 29 Brushless Tunnel BND Specs:, Motor Size:, 1800Kv brushless water-cooled, Radio:, S100 Servo, Spektrum 2.4GHz Marine Receiver, (Tranmitter required), Speed Control:, 60-amp brushless water-cooled, Hull Material:, Fiberglass Composite, Needed to Complete: Two 7.2V sub-C batteries or Two 7.4V 25C Li-Po batteries, Spektrum DSM2 Marine compatible transmitter,
Stiletto 29 Brushless Tunnel BND Designed by Pro Boat team ...Hobby-Lobby
IMPULSE 31 DEEP-V BL RTR
| Beam | 9 in (229mm) |
| Motor Size | 1800Kv brushless water-cooled |
| Radio | Pro Boat 2.4GHz pistol grip transmitter/Spektrum MR200 receiver |
| Speed Control | 60-amp brushless water-cooled |
| Hull Material | Fiberglass composite |
| Prop Size | 1.6 in x 2.5 in |
| Hull Type | Fiberglass Deep-V |
| Battery | 2-7.2V Ni-MH sub-C or 7.4 Li-Po 20C+ (not included) |
| Kit/RTR | RTR |
| Drive System | Flex shaft/direct |
| Minimum Age Recommendation | 14 years |
Needed to Complete: 4 - AA Batteries for Transmitter, 2-7.4V 20C+ LiPo batteries or 2-7.2V sub-C batteries w/Deans connectors (NiMH BL ESC Programming Module) - Model comes pre-programmed LiPo ready Technical Specifications: Impulse 31 Deep-V BL RTR Specs:Length: 31 in (787mm), ,
Impulse 31 Deep-V BL RTR Race ready out of the ...